Where can I download Configurez?
You can download Configurez on the Apple App Store and the Google Play Store:
- Configurez for iOS devices
- Configurez for Android devices
What is the current firmware?
The most recent firmware version is 3.5.3
How do I update my Runn?
- Open up the Configurez app
- Select to your Runn from the list
- If there is a firmware update for your Runn, you will get a pop up asking you to update your Runn
- Select to update your Runn
- Wait for your Runn to complete the update
- Once the update is complete, select Close
- Connect to your Runn and check the firmware version (the current firmware is 3.5.3)
Why a video that only helps with the part of the process no one would ever get confused with instead of written directions with links.
So, where do I get this configurez app for my android? It does not come up with a google play search on 4/15/2020.
Will this fix the always %0.00 incline bug?
The article has been updated with links to download from the Apple App Store and the Google Play Store.
Configurez was released in the Google Play Store on 4/14/2020, we are working to see why it is not found when searching.
This does address the issue with ANT+ incline & cadence not working.
I just received a new Runn device. I can't update it. Device is having led lighted. I go into the application (iOS) and select the Runn device. It says the device needs a firmware update. I click update now. It starts preparing update, lights on the runn goes off then the update fails...
Marc Wecker- I have just received my Runn and that exact same thing is happening to me too.
I got the same error as Marc Weker, why no reply from anyone @NPE?
Update fails again and again. Tried so many different things now. Frustrating.
This is exactly the same for me. Update fails each time and cannot access configuration etc.
For anybody struggling to update firmware. Just received my runn. Wouldn't update firmware using Samsung s21. Installed configurez on my old amazon fire tablet and it updated firmware 1st time, hope this helps
After the firmware Update to 3.5.3 the incline is fixed to 0.0. Hardware reset and setting back to factory calibration did Not help. What can i do? Thank You.
Please sign in to leave a comment.